AR15 16″ Aero Precision Lower, Ballistics Advantage Barrel 5.56mm 30 or 10 Round Magazine

AR15 16″ Aero Precision Lower, Ballistics Advantage Barrel 5.56mm 30 or 10 Round Magazine

This AR is built with components from renowned manufacturers such as Aero Precision, Rogers, Ballistics Advantage, Spike's Tactical, Dirty Bird and more. Each part was selected for its compatibility with other components, ensuring a fully functional and reliable rifle.

Transparency is key; we list the major components and their manufacturers below, along with the reasons each was chosen for this build.

Tested and fully functional!

Aero Precision – M4E1 Low Profile Stripped Lower Receiver – Anodized Black
– Threaded Bolt Catch Roll Pin – Allows for simple installation of the bolt catch and virtually eliminates the chance to damage the finish during installation (pin included). 1/16″ Hex Key required for assembly.
– Integrated Trigger Guard – Eliminates the possibility of breaking the trigger guard tabs by integrating the trigger guard into the lower, creating a stronger more rigid platform to build upon.
– Upper Tension Screw – Allows users to fine tune the fit of the upper and lower receiver using a nylon tipped tensioning set screw inserted in the grip tang of the lower receiver. This provides a tight fit with any standard AR15 upper receiver.
– Threaded Takedown Pin Detent Recess – Allows user to easily install the Takedown Pin detent and spring with the use of a 4-40 set screw (no more launching detents across the room).
– Increased Magwell Flare – Increased the flare of the magwell to aid in quick and efficient magazine changes.
– Marked and milled to accept short-throw safety selectors, but will work with standard selectors as well.

Barrel – Ballistic Advantage – The Ballistic Advantage Modern Series barrel is combines the durability and strength of 41V50 chrome moly vanadium steel with the exceptionally corrosion resistant salt bath nitride treatment. This provides not only an impressive barrel life, but ensures excellent accuracy and an affordable price. Every Ballistic Advantage barrel is guaranteed to give sub Minute of Angle accuracy with match grade ammunition.
This 16″ government contour barrel is chambered for 5.56 NATO ammunition and is ready to accept your favorite .750″ gas blocks. Weight: 28.0 oz. Material 4150 Chrome Moly Steel

Rogers Super-Stoc Mil-Spec Carbine Buttstock w/ Build-in QD Base
The Rogers Super-Stoc Deluxe rifle stock “RSS” is the ultimate refinement in AR/M4 stock technology.

The patented cam-lock system completely removes any slop or play inherent with collapsible stocks. Once the desired stock position has been selected, the stock can be locked down solid simply by depressing the cam-lock lever upward. Pressing the quick-release lever will disengage both the cam-lock, and detent pin, allowing you to quickly readjust the stock position.

Comes with removable recoil pad and Quick Detach port installed (QD swivel not included).

Features:

• Glass-filled and non-glass-filled Nylon blends
• Cam-lock system
• Quick Detach sling swivel port installed
• Length: 6.75″
• Fits: Mil-Spec Buffer Tubes
• Made in the U.S.A.

Expo Arms AR-15  Forged Upper Receiver
The Forged and Stripped AR-15 Upper Receiver is the foundation of your upper build. This receiver accepts MIL-SPEC components, including forward assist and port door assemblies. Precision machined from a 7075-T6 aluminum forging, this upper is protected by a MIL-SPEC Type III Class 2 hardcoat anodized finish. Built to extremely precise tolerances, these upper receivers go through a rigorous quality control process to ensure they are built to high quality with a premium finish.

Dirty Bird AR-15 5.56/.223/300BLK Bolt Carrier Group – Phosphate/Chrome-Lined - D127 

The Dirty Bird AR-15 Bolt Carrier Group comes fully assembled and ready to be dropped in. The carrier body is machined from 8620 steel, heat treated, & MP inspected. The carrier’s bore is hard chromed for increased corrosion resistance and reliability, per mil-spec. The bolt is machined from Carpenter 158 tool steel, shot peened to relieve stress, individually high-pressure tested and MP inspected. The bolt and carrier are both treated with a Mil-Spec phosphate coating for its durability and corrosion resistance. This Dirty Bird Phosphate Bolt Carrier Group features a gas key tube that is hard chromed and properly torqued and staked screws.

Bolt

• Machined from Carpenter Technology No. 158 alloy.
• Heat treated
• Shot peened per ASTM B851/SAE AMS2430S
• Individually High Pressure Tested (test fired)
• HP proof testing, 100% using a high pressure M197 or SAAMI commercial equivalent, without evidence of failure
• Individually Magnetic Particle Inspected after Initial Test Fire
• Manganese Phosphate Finish

Extractor

• Tool Steel Extractor
• Manganese Phosphate Finish
• Mil-Spec O-Ring

Carrier

• Machined from AISI 8620 aircraft quality alloy per ASTM A108/A322-13
• Full Mass M16 Profile
• Stress Relieved
• Hard Chrome Bore

Gas Key

• Machined from 4130 chromoly steel alloy per ASTM A108/A322-13
• Grade 8 Hardware
• Properly Staked
• Hard Chrome Internal
• Permatex sealed

MADE IN THE USA!

Bravo Company – The Bravo Company Manufacturing Low Profile Gas Block is manufactured within very tight MIL-SPEC tolerances. Machined from steel then phosphate finished, the internal diameter is then honed, ensuring a correct fit to your barrel. Secured using the two provided 10-32 x 3/16 knurled cup point set screws.

Expo Arms Mid-Length Gas Tube - The Expo Arms Stainless Steel gas tube is an excellent option to get your new rifle up and running. The corrosion resistant stainless steel construction ensures a life time of service. Each gas tube includes a gas block roll pin.
Features:

• Stainless steel construction
• Includes gas tube roll pin
• 11.75" total length

This gas tube is designed for barrels with mid-length gas systems that measure roughly 9" from the barrel's gas port to the front face of the receiver. Proudly made in the U.S.A.

Daniel Defense – Flash Suppressor Assembly – The Daniel Defense Flash Suppressor is designed to reduce muzzle flash.  Manufactured from aerospace 17-4 stainless steel and salt bath nitride finished, there’s minimal chance of corrosion.  The Daniel Defense Flash Suppressor comes in standard or extended length and 1/2 x 28 TPI or 5/8 x 24 TPI.

Spike's Tactical AR-15 Lower Parts Kit - Single Stage Trigger
Spike's Tactical set out to offer the best factory lower parts kit on the market! The lower parts kit they came up with exceeds military specifications by a long shot, they also have a much better fit, and finish! 100% made in the U.S.A. with a lifetime warranty.
Kit includes:

• Rounded hammer and hammer spring (works with all calibers).
• Trigger and trigger spring.
• Disconnector and disconnector spring.
• Stainless steel hammer and trigger pins with black oxide finish.
• Safety selector.
• Safety selector detent.
• Safety selector spring.
• Bolt catch.
• Bolt catch plunger.
• Bolt catch roll pin.
• Bolt catch spring.
• Magazine catch.
• Billet magazine catch button.
• Magazine catch spring.
• Pivot pin.
• Takedown pin.
• Takedown/pivot pin springs and detents.
• Aluminum trigger guard w/spring loaded detent.
• Trigger guard roll pin.
• Buffer retainer spring.
• Buffer retaining pin.
• Spike's Pro Grip.
• 1/4x28 Allen grip screw.
• Star lock washer for grip screw.

Magpul Foregrip
Aero Precision Forward Assist

A 30 or 10 round magazine will come standard, if you live in a 10 round state, then a 10 round magazine will be shipped with your order. Please confirm which upon purchase.

IT IS UP TO YOU TO KNOW IF THIS IS LEGAL IN YOUR STATE BEFORE Purchase!